Programming | flowcodexchange

MIAC(PIC) Controlled by labVIEW

AND MIAC MIAC is a Automation Controller from MATRX TSL with Analog inputs ,Digital Input and outputs ,Relay 8 Ampere capable outputs and...

Flowcode and Modbus.

Modbus is still one of the most commonly used protocols for field communications. It’s relative simplicity and robustness and openness...

SCADA Print (the faster way)

So to add a SCADA compatible Print to the SCADA firmware. First make a copy of the code as SCADAPrint.fcfx (or a name of your choice) Add...

SCADA Deep Dive

I wanted to take an in depth look at the SCADA system. One problem with SCADA is that it works well for small amounts of data (read a pin...

Controlling your MCU

The SCADA interface in Flowcode is powerful - but is limited to Windows PC and has limited graphics abilities (though v10 might change...

AMG8833 IR Sensor

The amg8833 provides a 8x8 infrared temperature sensor. In fact Flowcode supports this using the amg88xx component - but I only found...

ADS1115 ADC 16-bit with PGA use in Flowcode

The ADS1115 ADC is perfect for adding high-resolution analog to digital conversion to any microprocessor-based project. An easy to use...

Programming ATTiny MCUs from Flowcode

The ATTiny range of MCU chips provide a powerful chip with a minimum of hardware overhead. ATTiny chips provide 1 instruction per clock...