MIAC(PIC) Controlled by labVIEW
AND MIAC MIAC is a Automation Controller from MATRX TSL with Analog inputs ,Digital Input and outputs ,Relay 8 Ampere capable outputs and...
top of page
Search
QME Electronics
- Jun 10, 2021
- 10 min
Flowcode and Modbus.
Modbus is still one of the most commonly used protocols for field communications. It’s relative simplicity and robustness and openness...
564 views0 comments
Martin Fisher
- Jun 7, 2021
- 2 min
SCADA Print (the faster way)
So to add a SCADA compatible Print to the SCADA firmware. First make a copy of the code as SCADAPrint.fcfx (or a name of your choice) Add...
36 views0 comments
Martin Fisher
- Jun 7, 2021
- 2 min
SCADA Deep Dive
I wanted to take an in depth look at the SCADA system. One problem with SCADA is that it works well for small amounts of data (read a pin...
39 views0 comments
Martin Fisher
- May 28, 2021
- 2 min
Controlling your MCU
The SCADA interface in Flowcode is powerful - but is limited to Windows PC and has limited graphics abilities (though v10 might change...
27 views0 comments
QME Electronics
- May 18, 2021
- 4 min
ESP32 with INA226 Current and Bus Voltage Monitoring
In this short article we take a look at using the Flowcode component for the INA226 Current Sense and Bus Voltage Monitor with an ESP32...
1,497 views0 comments
Martin Fisher
- May 10, 2021
- 1 min
AMG8833 IR Sensor
The amg8833 provides a 8x8 infrared temperature sensor. In fact Flowcode supports this using the amg88xx component - but I only found...
60 views0 comments
QME Electronics
- May 9, 2021
- 3 min
INA219 Zerø-Drift, Bidirectional Current/Power Monitor With I2C Interface
In this short article we will take a look at the functionality of the Flowcode Component to communicate with the INA219 Current Sensor,We...
63 views0 comments
QME Electronics
- Apr 21, 2021
- 3 min
ESP32 with External ADC ADS1115 Measuring and Logging Small Signals
An Example Project Using the ESP32 with ADS1115 external with Flowcode ADS1115 Component. The ADS1115 is a 16Bit ADC with four single...
1,808 views0 comments
QME Electronics
- Apr 19, 2021
- 2 min
ADS1115 ADC 16-bit with PGA use in Flowcode
The ADS1115 ADC is perfect for adding high-resolution analog to digital conversion to any microprocessor-based project. An easy to use...
216 views0 comments
QME Electronics
- Apr 17, 2021
- 1 min
Flowcode Components Compatibility with MikroBus
The Mikrobus Standard is a proprietary bus system from MikroElektronika in Serbia. The Mikrobus was initial designed by MikroElektronika...
37 views0 comments
QME Electronics
- Apr 13, 2021
- 3 min
Using the MCP9808 Temperature Sensor In Flowcode
MCP9808 digital temperature sensor converts temperatures between -20°C and +125°C.The MCP9808 comes with user-programmable registers that...
94 views0 comments
QME Electronics
- Apr 10, 2021
- 7 min
Temperature Measurements with RTD Sensors (MAX31865)
In this short article we will take a look at the MAX31865 Resistance to Temperature Converter and it's use in temperature applications,...
582 views0 comments
QME Electronics
- Mar 31, 2021
- 6 min
Using the MCP3421 Small Signal AD Converter for Precise Small Signal Measurements
The MCP3421 is a single channel low-noise, high accuracy ΔΣ A/D converter with differential inputs and up to 18 bits of resolution in a...
379 views0 comments
Martin Fisher
- Mar 28, 2021
- 2 min
Programming ATTiny MCUs from Flowcode
The ATTiny range of MCU chips provide a powerful chip with a minimum of hardware overhead. ATTiny chips provide 1 instruction per clock...
150 views0 comments
Martin Fisher
- Mar 22, 2021
- 2 min
HC-SR04 Ultrasonic Distance Sensor
The HC-SR04 Ultrasonic distance sensor uses ultrasound pulses to measure distance. It fires 8 'pulses' of ultrasound and records how long...
214 views0 comments
QME Electronics
- Mar 21, 2021
- 2 min
Throttle Simulator for Cummins EDC (Electronic Diesel Control).
Running a large Diesel Engine (EDC Controlled) as a Stationary Plant being a Generator set or any other industrial Test-rig system there...
97 views7 comments
QME Electronics
- Mar 19, 2021
- 5 min
OBD2 Reader with Flowcode and Sparkfun OBD2 Board (ELM327)
What is OBD2 ? OBD2 is an Automotive Diagnostic Protocol which all manufactures(OEM) follow and implement in their Vehicle Control...
124 views0 comments
Martin Fisher
- Mar 17, 2021
- 2 min
Component installation
So you've bought a new component. You want to try it out - but first you need to tell Flowcode about it. Download the component and open...
68 views0 comments
QME Electronics
- Mar 17, 2021
- 5 min
Turbocharger Electronic Waste-gate Control (eWG)
Electronic Controlled Turbocharger Waste-gate
148 views0 comments
bottom of page